-
- Deck and House Paint
-
- Deck Stain
-
- Fence and House Paint
Landscaping
-
- Porch Staining
-
- Porch
-
- Side Walk
-
- Side Walk
Power Wash Residential and Commercial
Pressure Wash:
First you wash the fence or deck with water pressure to remove the accumulated dirt that has been there for years. We use a special machine with 300PSI or 400PSI of pressure.
Stain:
In order to paint the fence or deck it must let dry for 1 or 2 days.
-
- Deck Stain
-
- Deck with Transparent Stain
-
- Deck Stain
-
- Fence Stain
Fence and Deck Repair
-
- Fence Repair
-
- Fence before Repair
-
- Deck Repair
-
- Fence Reair
Fence Repair Pictures
Deck Repair Pictures
Deck, Fences, Patios or Porch Clean and Seal
-
- Deck after Power Washer
-
- Deck Stain
-
- Fence with Clear Coat
-
- Fence and Deck Stain
Fence Installation wood Cedar, Split Rail, Vinyl Fencing
We have the necessary tools, the team of people and know the materials needed for that the development of this project be of high quality and without harming the green areas and other related facilities
-
- Split Rail
-
- Private Fence
-
- Split Rail with Wire Dog
Fence Installation:
The first step for installation is to dig 24 inches of dept in order to put the post. 4x4x8’, 4x6x8’ or 6x6x8’.
Stringers Private Fence:
We use 2x4x8’ 3 boards per section of separation of 24 inches each.
Picket:
We use different measurements and sizes (8ft, 6ft, 5ft, and 4ft)
Split Rail:
Regularly we use 6x6x6’ poles. We dig 24 inches deep and let the concrete dry for 1 – 2 days for increased security.
Stringers:
To install split rail, we use 2x8x8’ with separation of 10 to 15 inches each one, wired so dogs won’t escape and rabbits won’t enter.
-
- Fence Comunity
-
- Fence with Clear Coat
-
- Private Fence
